Molecularly engineering polymeric membranes for H2/CO2 separation at 100–300 °C

Over the last two decades, polymers with superior H₂/CO₂ separation properties at 100–300 °C have gathered significant interest for H₂ purification and CO₂ capture. This timely review presents various strategies adopted to molecularly engineer polymers for this application. We first elucidate the Robeson's upper bound at elevated temperatures for H₂/CO₂ separation and the advantages of high-temperature operation (such as improved solubility selectivity and absence of CO₂ plasticization), compared with conventional membrane gas separations at ~35 °C. Second, we describe commercially relevant membranes for the separation and highlight materials with free volumes tuned to discriminate H₂ and CO₂, including functional polymers (such as polybenzimidazole) and engineered polymers by cross-linking, blending, thermal treatment, thermal rearrangement, and carbonization. Third, we succinctly discuss mixed matrix materials containing size-sieving or H₂-sorptive nanofillers with attractive H₂/CO₂ separation properties.     

Effectively promoted catalytic activity by adjusting calcination temperature of Ce-Fe-Ox catalyst for NH3-SCR

A series of Ce-Fe-O_x catalysts prepared by the different calcination temperatures (marked as CF-X, where X represented calcination temperature) were used to the selectivity catalytic reduction of NO_x by NH₃. The results explained the relationship between calcination temperature and the sulfate species over Ce-Fe-O_x, and then investigated the surface acidity and catalytic performance. The large amounts of sulfate species were formed over CF-450 and CF-550 while it was decomposed with further the increasing of calcination temperature, which resulted in the loss of surface acidity, causing a decrease in the catalytic activity over Ce-Fe-O_x. Thereby, the CF-450 catalyst showed the best catalytic activity and over 90% NO_x conversion was obtained at 244–450 °C. Besides, the favored pore structure, more Fe³⁺ active species, higher Ce³⁺ concentration and the abundance of chemical adsorbed oxygen species, as well as the surface acid sites, would together contribute to the excellent catalytic activity of CF-450 catalyst.     

Surface charging behaviors of electrocatalytic interfaces with partially charged chemisorbates

The surface charge is a key concept in electrochemistry. Mathematically, the surface charge is obtained from a spatial integration of the volume charge along a particular direction. Ambiguities thus arise in choosing the starting and ending points of the integration. As for electrocatalytic interfaces, the presence of chemisorbates further complicates the situation. In this minireview, I adopt a definition of the surface charge within a continuum picture of the electric double layer. I will introduce surface charging behaviors of firstly ordinary electrochemical interfaces and then electrocatalytic interfaces featuring partially charged chemisorbates. Particularly, the origin of nonmonotonic surface charging behaviors of electrocatalytic interfaces is explained using a primitive model. Finally, a brief account of previous studies on the nonmonotonic surface charging behavior is presented, as a subline of the spectacular history of electric double layer.     

A slit viscometer for the measurement of the viscosity of aqueous systems at high temperatures

A slit viscometer has been constructed to measure the viscosity of aqueous systems at temperatures up to 140 °C. Liquid is forced backwards and forwards through the slit by the use of varying air pressure. The flow rate is obtained from the time for the liquid to pass conductivity probes located in liquid reservoirs either side of the slit. The pressure difference between two points on the slit wall is determined using a differential pressure transducer. By varying the slit height measurements can be made on liquids with viscosities in the range 10 to 10^–3 Pa s. Shear rates from 10 to 10⁴ s^–1 can be achieved. A simple microcomputer control system enables the shear stress to be automatically increased and decreased stepwise. Representative data on polysaccharide solutions and strach suspensions are presented. The viscometer is particularly well-suited for following temperature-dependent biopolymer transitions and the thermal depolymerisation of water soluble polymers.     

On the use of negative penalty parameters in aeroelastic divergence analysis of lifting surfaces

This paper shows that a numerical modelling method in which constraints are replaced with positive and negative penalty functions, which may be regarded as artificial elastic restraints of positive and negative stiffness, may be safely used to determine the critical speed associated with aeroelastic divergence. The critical speeds of a beam with restraints of positive and negative stiffness are found to converge to that of the constrained system, from below if the stiffness is positive and from above otherwise. A uniform Euler–Bernoulli beam clamped at the rear end is analysed using an artificial restraint to enforce the constraint of zero rotation at the clamp, and the results are compared with the exact critical speed of the constrained system obtained analytically. The paper shows that, contrary to common belief that the penalty parameter must be positive, the inclusion of a negative penalty parameter enables the determination of errors due to violation of the constraints.     

Electro-optical properties of smectic liquid crystal-polymer composite with a negative dispersion of birefringence

Two-dimensionally self-organized smectic liquid crystal (LC)-polymer composite has been reported to show a negative dispersion of birefringence [H. Lee and J.-H. Lee, Opt. Lett. 39, 5146 (2014)]. In this paper, we separately measured the extraordinary and ordinary refractive indices n_e and n_o of the pure LC and LC-polymer composite and simulated the dependence of the transmittance and the color on the viewing angle for the display application. The LC-polymer composite with the negative dispersion property showed a wider viewing angle and a smaller color shift compared to the pure liquid crystal with a positive dispersion of birefringence.     

Modulating microstructure and optical properties of hydrogenated nanocrystalline silicon photovoltaic materials prepared under hydrogen diluted silane PECVD by various DC bias

Hydrogenated nanocrystalline silicon (nc-Si:H) thin films were fabricated by plasma enhanced chemical vapor deposition under the various negative substrate bias voltages with hydrogen as a diluent of silane. The microstructure and optical properties of nc-Si:H thin films were studied by Raman scattering spectroscopy, X-ray diffraction (XRD), transmission electron microscopy, and optical transmission spectroscopy. Raman spectra and XRD pattern reveal that applying negative bias voltages at the moderate level favors the enhancement of crystalline volume fraction, increase of crystallite sizes and decrease of residual stress. We also demonstrated that the negative direct current bias can be used to modulate the volume fraction of voids, refractive index, absorption coefficient, compactness and ordered degree of nc-Si:H films. It is found that the film deposited at −80 V shows not only high crystallinity, size of crystallite, and static index n₀ but also low residual stress and volume fraction of voids. Furthermore, the microstructural evolution mechanism of nc-Si:H thin films prepared at different bias voltages is tentatively explored.     

A scheme for a topological insulator field effect transistor

We propose a scheme for a topological insulator field effect transistor. The idea is based on the gate voltage control of the Dirac fermions in a ferromagnetic topological insulator channel with perpendicular magnetization connecting to two metallic topological insulator leads. Our theoretical analysis shows that the proposed device displays a switching effect with high on/off current ratio and a negative differential conductance with a good peak to valley ratio.     

Observation of room temperature negative differential resistance in solution synthesized ZnO nanorod

We report the observation of negative differential resistance (NDR) in solution synthesized ZnO nanorod. The ZnO nanorod was fabricated as a two terminal planar device using lithographically patterned Au electrodes. The measured current–voltage response of the device has shown a negative differential resistance behavior. The peak-to-valley current ratio of the NDR is found to be greater than 4. The mechanism of this observed NDR effect has been explained based on charge trapping and de-trapping at the nanoscale contacts. It is the first observation of negative differential resistance effect in solution synthesized ZnO nanorod.